Rubber products manufacturers

For over 50 years Roncaglia® is engaged in manufacturing rubber products for use in military vehicles. The new wheels are used stickers and it removes the worn rubber material and re-glue ensuring the same durability in both cases. Caterpillars are also made of metal and half-tracks and rubber pads for steel tracks. In the laboratory has developed rubber compounds highly tear resistant and abrasion to which they are subjected military vehicles. Roncaglia® has been involved since its inception in the manufacture of wheels for the historic Sherman, the AMX 13, AMX 15,SK 105, TAM and Halftrack Diamont T and M 113. This facilitates the fabrication of pieces by its age or modifications made and not on the market.

Rubber products manufacturers
Rubber products manufacturers

 Roncaglia® manufactures crawler pads VVC vehicles TAM family since the beginning of the emergence of TAM. Manufactures all the components of both metal and rubber, compounds developed in his laboratory that met over the original specifications.


Roncaglia® also manufactures pads for crawler carriers M 113.
On the market are in use pads made for more than 30 years and the rubber compound has not undergone aging, since they are highly resistant to ozone, ultraviolet radiation, tear and abrasion, and has been used in the field for which were not intended

Rubber products manufacturers
Rubber products manufacturers

Roncaglia® manufactures more than 50 years of rubber products, rubber and metal for military vehicles. So - among other developments - built for years tracked vehicles for semi-caterpillar Diamond T, and disabled the service today in the Argentine Army. Caterpillars far exceeded expectations and who underwent exceptional efforts to be used in mountainous areas with floor slabs detached from the mountain that tested high tear strength required. Currently made ​​to order to supply current owners and collectors of these historic vehicles. Also it is dedicated to the task of providing the bogie tracks and wheel to Latin American countries that keep such vehicles in operation.

Rubber products manufacturers
Rubber products manufacturers

RONCAGLIA(R) manufactures several years shims for use in the service ramp, aircraft parking and airport hangars. Are intended to prevent movement that wind can cause an aircraft on the ground. For your travel more comfortable molded handles are fitted to protect the hand of anyone handling. This model greatly improves the classic hemp rope with knots at the ends, is registered as a design improvement by Roncaglia. Shims are identified with the name of Carrier and three heads are in reflective paint for better viewing in the dark. We also produce larger shims to maintain large-sized vehicles immobilized as those used on the beaches in containers and port terminals and cargo areas aeronafta in Airports. Rubber products manufacturers
Rubber products manufacturers

Within the project of modernization of the Military Vehicle TAM faced by the Argentine Army, whose first prototype – called TAM 2C – just delivered the Israeli company Elbit System, RONCAGLIA® has been involved with the provision of the side skirts which reduce significantly the effect “spray” produced by dust removed by the undercarriage during circulation in desert areas, which made it easily detectable over long distances. These skirts also help to reduce the heat signature produced by the undercarriage. The side skirts are added to the front and rear RONCAGLIA® manufactures for years. Rubber products manufacturers
Rubber products manufacturers

<| Primero << Anterior

 Registros 21 a 26 de 26

Rubber products manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830

Rubber products manufacturers Recommend this Page
Rubber products manufacturers Bookmark this page!
Guardar en:
Guardar en Marcadores
Rubber products manufacturers
Rubber Sleeves
Rubber products manufacturers

The most important steel manufacture argentine company has employed the RONCAGLIA® SLEEVE for steel sheets coils winder and de-winder mandrels, since more than 30 years in his five plants.
The use of this rubber sleeve, allows:

1-to protect the steel sheet, the defects caused by the metallic mandrel, on the first loops. When a metallic mandrel is opened against the thin metallic sheets, usually a typical mark has been place, on the first loops, these loops have been rejected.

2-to replace metallic supplements for different I.D. coils.    When it is necessary to produce coils with different internal diameters, the use of Roncaglia® rubber sleeve, instead of such heavy’s metallic supplements, assures faster and safer installation.

3-to protect mechanical mandrel systems. When you use Roncaglia® rubber sleeve, you have an additional advantage; you are protecting the mandrel mechanisms from dust, which can affect the normal operation.   

We are Rubber Sleeves manufacturers

Juan Roncaglia SAIC
Todos los derechos reservados, copyright 2011
Calle 39 N° 2067 Villa Maipú - San Martín Provincia de Buenos Aires República Argentina
Teléfono: (54-11) 4753-1201 - Fax: (54-11) 4752-0830

Last searches: rubber products manufacturers, rubber products, argentine rubber products, rubber products industriesmail ec21 com loc ar, sewer tank bladder, http water hammer, sewer air valve bladders, mail rampf%2ecn loc ar, fenders for pushboats, duckbill check valves usa, rubber for sewage, steel retailers, rubber sleeve for winder drum,

Diseño web y optimización