Rubber products manufacturers

For over 15 years JUAN RONCAGLIA SAIC Molded rubber is present with its rubber seals -gaskets epdm Peroxid cured- developed especially for use in the chlorine producing equipment. Chlorine, and more its gases, are highly aggressive with the compounds of rubber. Therefore, in our laboratory has developed a compound that turns out to be more resistant to attack. Our gaskets are used by equipment manufacturers as a replacement for chlorine and chlorine producers. We have spare parts for equipment Ionics, Uhdenora, Alfa Laval and Eltech. We supply the Argentine market and export to the U.S., countries in Central America, South America and Oceania Molded rubbers. The joints are carefully packed, to enable so, the immediate placement of equipment.

We are molded rubbers manufacturersRubber products manufacturers
Rubber products manufacturers

RONCAGLIA(R) manufactures several years shims for use in the service ramp, aircraft parking and airport hangars. Are intended to prevent movement that wind can cause an aircraft on the ground. For your travel more comfortable molded handles are fitted to protect the hand of anyone handling. This model greatly improves the classic hemp rope with knots at the ends, is registered as a design improvement by Roncaglia. Shims are identified with the name of Carrier and three heads are in reflective paint for better viewing in the dark. We also produce larger shims to maintain large-sized vehicles immobilized as those used on the beaches in containers and port terminals and cargo areas aeronafta in Airports. Rubber products manufacturers
Rubber products manufacturers


 Registros 1 a 2 de 2


Rubber products manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830



Rubber products manufacturers Recommend this Page
Rubber products manufacturers Bookmark this page!
Guardar en:
Guardar en Marcadores
Rubber products manufacturers
Rubber Sleeves
Rubber products manufacturers

The most important steel manufacture argentine company has employed the RONCAGLIA® SLEEVE for steel sheets coils winder and de-winder mandrels, since more than 30 years in his five plants.
The use of this rubber sleeve, allows:

1-to protect the steel sheet, the defects caused by the metallic mandrel, on the first loops. When a metallic mandrel is opened against the thin metallic sheets, usually a typical mark has been place, on the first loops, these loops have been rejected.

2-to replace metallic supplements for different I.D. coils.    When it is necessary to produce coils with different internal diameters, the use of Roncaglia® rubber sleeve, instead of such heavy’s metallic supplements, assures faster and safer installation.

3-to protect mechanical mandrel systems. When you use Roncaglia® rubber sleeve, you have an additional advantage; you are protecting the mandrel mechanisms from dust, which can affect the normal operation.   

We are Rubber Sleeves manufacturers


Juan Roncaglia SAIC
Todos los derechos reservados, copyright 2011
Calle 39 N° 2067 Villa Maipú - San Martín Provincia de Buenos Aires República Argentina
Teléfono: (54-11) 4753-1201 - Fax: (54-11) 4752-0830
E-Mail: caucho@roncaglia.com.ar

Last searches: rubber products manufacturers, rubber products, argentine rubber products, rubber products industriesrubber sleeves for steel coils, world producers and manufacturers mail, zhangly%40boill%2ecom loc ar, rubber manufacturer /email, hydraulic bladder to seal of gas, weld on boat bumpers, %40normakmetal%2ecom%2etr loc ar, mail hangart be loc ar, cured rubber sheet manufacturers, hydraulic rubber hose,

Diseño web y optimización www.paginadigital.com.ar