Rubber products manufacturers

18/01/2022 LaboratoryRubber products manufacturers

RONCAGLIA (R) has a laboratory, where the rubber compounds undergo physical and chemical analysis to confirm that they meet all conditions before being used in the productive sectors of the Company. Degree of hardness, elongation, abrasion resistance, chemical resistance to various products, an aging, placing some of the controls are being performed.
 
It is also important to note that, in addition to submitting to control all the compounds that are sent to production, the laboratory develops new formulations for new needs, and primarily in response to the policy of continual improvement, which characterizes RONCAGLIA (R).
 
The laboratory has a rehómetro, oven aging, abrasion tester, tape measure and dynamometer.
 
It represents a fundamental contribution to the work mancomuncado INTI - Rubber current name of the Center for Research and Technological Development of the Rubber Industry, which Juan Roncaglia SAIC is a founding member. In this Institute, Roncaglia carries out tests to contrast the results of his laboratory with the Institute Oficial.Esto doubly ensures the results beyond the calibration to be detected in only all elements of control.
 

Rubber products manufacturers
Rubber products manufacturers

17/01/2022 Contact UsRubber products manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830

Rubber products manufacturers
Rubber products manufacturers

16/01/2022 Rubber Sleeves Rubber products manufacturers

JUAN RONCAGLIA SAIC also produce RONCAGLIA(R) rubber sleeves for export to major steel companies all over the world.

ADVANTAGES FOR THE USER

Reject reduction. The level difference at the end of the coiled rolled steel sheet, as well as the metallic mandrel sides, are absorbed by the elastic rubber sleeve. No end marks on the following strip windings.

Shorter set-up time. Very fast change of inner coil diameter. The sleeves can be mounted with working installation. Change the I.D. coil en minutes.

Safer operation. Safer operation comparing to steel heavies reel jaws.

Mandrel protection. Addicional advantage, RONCAGLIA (R) rubber sleeves protects mandrel mechanisms.

  Rubber products manufacturers
Rubber products manufacturers

Check valves are used in the installation of hydraulic systems to let liquids flow in one direction but prevent them from flowing in the opposite direction. In many applications these valves - made of steel or cast iron - which are heavy as well as costly and need constant maintenance, are replaced by the so-called Duck Bill Check Valves.

RONCAGLIA(R) Duck Bill Check Valves are manufactured entirely in rubber, using compounds which are highly resistant to different environments.

They weigh 10% or less than regular valves, thus making them more economical, easy to transport, easy to mount and maintenance free.

Due to their convenient design, they are not likely to get stuck should strange elements be swept by the fuids.

They are manufactures from 2 inches up 55 inches diameter.

They do not need external energy to operate. They are easily mounted at the end line of sewers or storm sewers. RONCAGLIA exports Check valves all over the world.Rubber products manufacturers
Rubber products manufacturers

In the river transportation of goods by barges, many barges are pushed by one tug. To avoid the constant friction of metals, JUAN RONCAGLIA SAIC produces two types of defenses 1-metal plates with rubber in different sizes to be welded in the front of the tug 2-Multilayered rubber reinforced with textil insertion, fenders. These fenders are employed all over the world for this application.

Rubber products manufacturers
Rubber products manufacturers

In the river transportation of goods by barges, many barges are pushed by one tug. To avoid the constant friction of metals, JUAN RONCAGLIA SAIC produces defenses multilayered rubber reinforced with textil insertion, fenders. These fenders are employed all over the world for this application.

Rubber products manufacturers
Rubber products manufacturers

Roncaglia weld on bumpers are used to protect push tugboats and other structure from damage caused by the constant friction between the tug and barge

Roncaglia produces standard dimentions weld on bumpers, as well as parts according the customer request

All these products are manufactured with high wear and environmetal resistant rubber.

The rubber bonded to steel base plate has a bond stregth higher than the tensile strength of the rubber.

 

 

Rubber products manufacturers
Rubber products manufacturers

In the river transportation of goods by barges, many barges are pushed by one tug. To avoid the constant friction of metals, JUAN RONCAGLIA SAIC produces two types of defenses 1-metal plates with rubber in different sizes to be welded in the front of the tug 2-Multilayered rubber reinforced with textil insertion, fenders. These fenders are employed all over the world for this application. Rubber products manufacturers
Rubber products manufacturers

In the river transportation of goods by barges, many barges are pushed by one tug. To avoid the constant friction of metals, JUAN RONCAGLIA SAIC produces two types of defenses 1-metal plates with rubber in different sizes to be welded in the front of the tug 2-Multilayered rubber reinforced with textil insertion, fenders. These fenders are employed all over the world for this application. Rubber products manufacturers
Rubber products manufacturers

For over 50 years Roncaglia® is engaged in manufacturing rubber products for use in military vehicles. The new wheels are used stickers and it removes the worn rubber material and re-glue ensuring the same durability in both cases. Caterpillars are also made of metal and half-tracks and rubber pads for steel tracks. In the laboratory has developed rubber compounds highly tear resistant and abrasion to which they are subjected military vehicles. Roncaglia® has been involved since its inception in the manufacture of wheels for the historic Sherman, the AMX 13, AMX 15, TAM and Halftrack Diamont T and M 113. This facilitates the fabrication of pieces by its age or modifications made and not on the market.

Rubber products manufacturers
Rubber products manufacturers



Rubber products manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830



Rubber products manufacturers Recommend this Page
Rubber products manufacturers Bookmark this page!
Guardar en:
Guardar en Marcadores
Rubber products manufacturers
Rubber Sleeves
Rubber products manufacturers

The most important steel manufacture argentine company has employed the RONCAGLIA® SLEEVE for steel sheets coils winder and de-winder mandrels, since more than 30 years in his five plants.
The use of this rubber sleeve, allows:

1-to protect the steel sheet, the defects caused by the metallic mandrel, on the first loops. When a metallic mandrel is opened against the thin metallic sheets, usually a typical mark has been place, on the first loops, these loops have been rejected.

2-to replace metallic supplements for different I.D. coils.    When it is necessary to produce coils with different internal diameters, the use of Roncaglia® rubber sleeve, instead of such heavy’s metallic supplements, assures faster and safer installation.

3-to protect mechanical mandrel systems. When you use Roncaglia® rubber sleeve, you have an additional advantage; you are protecting the mandrel mechanisms from dust, which can affect the normal operation.   

We are Rubber Sleeves manufacturers


Juan Roncaglia SAIC
Todos los derechos reservados, copyright 2011
Calle 39 N° 2067 Villa Maipú - San Martín Provincia de Buenos Aires República Argentina
Teléfono: (54-11) 4753-1201 - Fax: (54-11) 4752-0830
E-Mail: caucho@roncaglia.com.ar

Last searches: rubber sleeves, bladders for water hammer, bladders for sewer water, duck bill check valves, defense push boats, pushnee weld on bumpers, protective defense to push boats, epdm peroxid cured gaskethome built tracked vehicle, rubber products manufacturers email, roncaglia sleeve, email rubber manufacture com, chlorine used with epdm gaskets, thin rubber sleeve, iron let flow, rubber products mail, contact contron%2ecom%2ecn loc ar, protection rubber products manufacturers,

Diseño web y optimización www.paginadigital.com.ar